The instruction seems utterly straightforward: work 20 rows. Or the equally unassuming: work in stockinette stitch until piece measures 10 inches.
As with so many things in knitting, it’s entirely simple, yet still the source of debate. It’s exactly the sort of thing that seems so completely obvious when you’re just starting out that you don’t actually think to ask about it.
So you just do what makes the most sense to you. And keep doing it. Until, a couple of years later, you find out that someone else does it completely differently.
Let’s answer those most basic questions: how do you count and measure knitting?
This column will cover counting. Stay tuned for my next column: measuring.
Counting Stitches in Fabric
Why do I specify “in fabric?” Because counting stitches that are on the needle is exactly what it sounds like: you count the loops. You’ll be pleased to hear that no further direction is required on this score.
Counting stitches in fabric also is reasonably straightforward. In stockinette stitch, a stitch looks like the letter V, or a heart shape:
What seems to complicate things is that the knit fabric appears the same if you look at it with cast-on edge at the bottom, or “upside down,” with cast-on edge at the top. If you turn the work (or photo) upside down, you’ve still got tidy Vs, but now they’re offset by half a stitch. The perfect V of the stitch is formed from the right leg of one V, and the left leg of another. Or, if you look at it another way, it’s a little tent shape:
You can count either shape: it really doesn’t matter. For an accurate count, just make sure you’re consistently counting the same shapes: either only the downward OR only the upward pointing Vs.
Purl stitches look like bumps, which can be harder to see because of how they’re constructed. A purl stitch is looped around its downstairs neighbor, the stitch in the row below:
You’ve got both upwards and downwards-facing loops, the stitch and its half-offset, upside-down neighbor. Again, you can count either shape—but you should count only one.
If you find yourself in the position of having to count purl stitches in a ribbing or reverse stockinette fabric, flip the fabric over and count the knits. Much easier!
In garter stitch, you’ve also got downward-facing curves, “umbrellas,” and upward-facing curves, “smiles.” The highlighted “umbrella” in the photo below is a knit stitch, the same basic V shape as the knit stitch in stockinette, but its top loop is caught up in the ridge:
In a garter ridge, the downward-facing curves are the tops of one row’s stitches; the upward facing curves are the bottoms of the stitches from next row up. For an accurate count of the stitches, choose one direction of curve and count only those.
In the MDK Shop
If you’re working stockinette-based fabric, or at least a fabric that has some columns of knit stitches, like a ribbing, then you count the Vs of the knit stitches, vertically, going up and down.
To count rows in a reverse stockinette column: just flip it over and count the knit stitches.
If you’re working garter stitch, it’s pretty hard to count individual rows, because the fabric compresses vertically. So we don’t. We count ridges: each garter ridge counts for two rows.
Weird subtlety/controversy #1: If you’re counting rows in a fabric that’s on the needle, in a WIP, don’t count the stitches that are on the needle.
Actually, what you shouldn’t be counting is the “row” formed by the cast on. The cast on doesn’t count as a row. But it’s easier to count all the rows in the worked fabric, below the needle, and just not count the loops on the needle.
Some may disagree with me. It doesn’t matter, as long as you are consistent within your own work. I look at it as follows: if I’m told to cast on 10 stitches, and work 10 rows, and I count off my rows as I work, I start counting with the first row after the cast on. Working 10 rows gives me 11 stacked loops – including the one on the needle—one of which corresponds to the cast on. So just count the loops below the needle, right down to the bottom.
Weird subtlety/controversy #2: I glibly remarked above that one garter ridge is two rows. And that you don’t count your cast on if you’re counting rows. But there is one exception to this.
If you use the Long Tail cast on method, and knit the first row (working flat, not joined in the round), then your cast on edge looks like a purl ridge. And if you’re counting garter ridges, there’s no reason why you shouldn’t count that to be your first ridge. In fact, it’s advisable. It creates a clean and tidy edge, where the cast on disappears into the fabric. This is what is recommended in the Mason-Dixon Knitting log cabin patterns!
(Editors’ note: We are gratified, Kate, as we have had to argue this point sometimes, and we lacked the ability to state the logic as clearly as you have, but continued to fight our corner nonetheless. With the clean edge in this photograph, we rest our case.)
But this nuance relies on the properties of the Long Tail cast on. When working the Long Tail, you’re creating knit stitches, and on the back side—the side you’re looking at when you start to work the first row—you see purl stitches.
If you use another cast-on method—the cable, or the knitted-on method, for example—then the edge is rather at odds with the garter fabric.
Compare the two:
Top: cable cast on. Bottom: long tail cast on.
(If you absolutely don’t want to have that first purl ridge for garter, or any kind of ridge, I recommend using either the backwards loop method, or the purl version of the Long Tail, so that you get the knit/smooth side of the edge facing on the first row worked.)
The corollary to this is that your bind off can also be used to create another garter ridge: if you bind off knitwise on the WS, it will show as a tidy RS ridge.
If you want a clean edge in your stockinette stitch fabric, use the (standard, knitwise version of) Long Tail cast on method and purl the first row. If you’re working in the round, this happens naturally. Or, heck, get clever and use the purlwise variant of the Long Tail method and then knit the first row.
In the swatch below, I used two different version of the Long Tail method, and then knitted the first row.
The smoother loops on the right were created by using the purlwise variant of the Long Tail method. On the left, the bumps happened because I used the standard, knitwise version of the long tail cast on..
Weird subtlety/controversy #2.1: This means that two knitters could produce fabrics that have the same number of garter ridges but different numbers of rows worked. Yes! Bonkers! But it absolutely doesn’t matter. You can’t really see individual rows in garter stitch, so as long as you’re consistent within a given project, you’ll be fine. It’s all about the ridges.